TOOLS & SHOP ORGANIZATION

Which Grypmat Size? Small, Medium, Large & XL Compared

Compare Grypmat Small, Medium, Large and XL tool mats by job type, available colors and DUO, TRIO or QUAD set options. Warehouse stock checked Nov. 20, 2026.

Gray Grypmat QUAD set showing four sizes of flexible silicone tool trays

Which Grypmat size should you buy? Choose based on the tools, fasteners and work surface you use most often. Small is a compact spot for loose hardware, Medium gives everyday hand tools more room, Large accommodates a wider tool spread, and XL offers a broad work area. If your jobs vary, a DUO, TRIO or QUAD set lets you separate small parts from larger tools.

For working automotive and aviation technicians, the best tool mat is the one you can position securely, keep clean and reach without interrupting the job. Here's how the four Grypmat Plus sizes compare, including which buying options are actually stocked.

Grypmat Plus size comparison

Size Best starting use Buying option checked Nov. 20, 2026
Small Bits, trim clips, nuts, washers and smaller hardware Standalone Gray available; also included in DUO, TRIO and QUAD
Medium Screwdrivers, compact ratchets, sockets and mixed small parts Standalone colors out of stock; included in available sets
Large Several hand tools and fastener groups during a larger repair Standalone colors out of stock; included in TRIO and QUAD
XL Broad bench, cart and project work surfaces Standalone Gray available; included in QUAD

Availability snapshot: These options were checked against the TBW Montana Warehouse's available inventory on November 20, 2026. Inventory and selectable colors can change. The product page and checkout determine your final options.

Small: give the little parts their own place

The Small Grypmat Plus in Gray has a 9 × 4.25-inch footprint and a 1-inch published height. Its compact compartments make sense for bolts, bits, washers, pins and clips that otherwise disappear into the work area. Consider it for interior disassembly, small brackets, electronics work or anything with several small pieces.

A Small doesn't replace the workspace needed for a full set of hand tools. It's often most useful alongside a larger tray: hardware goes in one, active hand tools go in the other. Orange and Green standalone Small variants are not currently stocked at the Montana location, though all three colors are available in the sets checked for this guide.

Medium: the everyday workbench choice

Medium is the step up when you need to lay out a compact ratchet, socket extensions, driver bits or a couple of screwdrivers alongside loose hardware. Use it when a Small would become crowded but you don't have much cart or bench space.

Standalone Medium variants are currently out of stock in Montana. If you need a Medium now, the DUO (Small + Medium), TRIO (Small + Medium + Large), and QUAD (all four sizes) all showed available colors when checked. The individual Medium and set product listings currently show different dimensions, so confirm the exact measurement with customer support before ordering for a tight clearance.

Large: for the tools you keep picking up and putting down

During brake, suspension or engine-bay work, the active tool spread can include pliers, a ratchet, extensions, screwdrivers and several fastener groups. Large gives that collection a wider landing zone. The product listing shows a 16.75 × 9.25-inch footprint; verify height if clearance is important.

All standalone Large colors currently show no available Montana stock. To get the Large together with smaller trays, compare the TRIO and QUAD sets. You don't need to select the largest package by default: a tray that fits securely in your actual workspace is preferable to one you can't place safely.

XL: a larger landing zone for a full job

At 24 × 12 inches, XL gives you substantially more room for an organized spread of hand tools and parts. It's useful on a broad workbench or cart when you want more work surface in one tray. On a narrow engine bay, a smaller tray may be easier to position.

The standalone XL in Gray is available in the Montana inventory check. Green and Orange standalone XL were out of stock, while the QUAD set included an XL and had available color options.

DUO vs. TRIO vs. QUAD: which set makes sense?

These sets give you multiple tray sizes without requiring you to find one tray that does everything.

  • DUO — Small + Medium: a sensible start for light repairs, workbench organization and keeping hardware away from active tools.
  • TRIO — Small + Medium + Large: the middle option for technicians switching between small fasteners and a larger spread of hand tools.
  • QUAD — Small + Medium + Large + XL: all four sizes for those who want a wide tray as well as smaller dedicated areas.

At the time of checking, all three sets had Orange, Green and Gray variants with available inventory in Montana. The set listings—not a guess from individual item inventory—are the source for set availability.

Compare the Grypmat Plus TRIO's available colors and options.

Three questions to answer before buying

1. What are you trying to keep in place?

For nuts, washers and clips, start with Small. When your active tools include several ratchets, pliers or extensions, compare Medium and Large. For a broad bench setup, consider XL. More tray area is not necessarily more useful if everything gets piled together.

2. Where will you put it?

Measure the surface before you buy. A Grypmat is flexible silicone, not a fastener or mounting bracket. Place it on a stable, clean area away from moving machinery or unsafe heat. On painted surfaces, remove grit from both the surface and underside before setting down the tray. Follow site-specific and aircraft tool-control procedures where required.

3. Do you need magnetic retention?

Grypmat is non-magnetic. The tray relies on flexible silicone, surface grip and its compartments instead of magnets. If you're comparing those two different ways of keeping hardware close, read the silicone-versus-magnetic tool tray guide. Neither tray style is a substitute for a required tool count or foreign object debris control procedure.

A simple tool-organization setup for working mechanics

Keep one area for fasteners, another for the hand tools in active use, and a clear spot for removed components. Return tools to an assigned position after each step instead of allowing the work surface to spread. When the job ends, check the tray compartments, reconcile tools and parts, and wash the mat with soap and water before storage.

Inside a toolbox drawer, Toolbox Widget modular socket and tool organizers perform a different job. Grypmat handles the tools you've taken out while you work. The two approaches complement one another; they aren't substitutes for tool accountability.

Bottom line: buy for your workspace

If you mostly work with small hardware, a standalone Gray Small is the simplest available option. If you use a mix of small parts and full-size tools, compare DUO or TRIO. Choose QUAD when you know you'll use the full-size XL as well as the three smaller mats. For a standalone extra-large work surface, Gray XL is currently available.

Shop available Grypmat Plus sizes and sets.

Product specifications and set contents referenced in this guide were checked against Grypmat.com product listings. Inventory was verified from the TBW Montana Warehouse on November 20, 2026; availability can change.

SHOP THE QUAD4 TRAY SET

Everything in its place.

One Small, Medium, Large and XL silicone tray for the workbench, tool cart and job.

Grypmat QUAD in Green
$99.99Grypmat Plus QUAD

Adds the selected QUAD to your cart and opens secure checkout. Any items already in your cart stay there.

PUT IT TO WORK

Choose the right setup for your next job.

From modular organizers inside the toolbox to a silicone landing zone for parts, keep the work area ready.

← Back to tool organization guides